How To Repair Top Sheet Of Skis

• #ane

Wife got a new chip forth the elevation edge today. In the past I simply smoothed it out so no ripping and called it good. Is there anything else I could or should practice?

Thanks!

• #iv

Mix up some epoxy and smear a film of it over the damaged area in an attempt to seal moisture from inbound the core is what I exercise to my skis.

Thank you. It is small and not also deep but epoxy coat is a expert idea.

• #5

Hmm. Looks like I need to buy me some epoxy. None in my tuning room.

Any recommendations on proficient ski peak sail epoxy?

• #vi

Hmm. Looks like I need to purchase me some epoxy. None in my tuning room.

Whatsoever recommendations on good ski top sheet epoxy?

• #7

Put a piece of tape along the sidewall to create a dam. And so put epoxy in the 'reservoir' behind the dam. That way you tin can get an epoxy filler that is as deep as you need. This chip has been filled and filed abroad. O

• #8

Put a piece of tape along the sidewall to create a dam. Then put epoxy in the 'reservoir' behind the dam. That fashion you tin go an epoxy filler that is as deep as y'all demand. This flake has been filled and filed away. O View zipper 61390

View zipper 61391

Cheers. Whatsoever epoxy you recommend?

• #ix

JB Quik if greyness matches. Harbor Freight for clear. Or any quick cure hardware store epoxy.

For repair strength on a dry function, regular JB Weld is good. Just be patient to let it fully cure.

Skis are pretty robust and can tolerate lots of dings and fries. Don't stress over information technology too much.

Eric

Source: https://www.skitalk.com/threads/top-sheet-chip-repair.13098/

Posted by: harpbeile1998.blogspot.com

Share this post